Hunter Douglas Silhouette DuoLite Скачать руководство пользователя страница 9

Страница: 9 / 44

INSTALLATION

■

Use a

⁄

" drill bit to drill holes for the mounting screws.

CAUTION:

Use drywall anchors when mounting into drywall.

■

If no additional clearance is required, attach the installation
brackets directly to the mounting surface using the screws
provided.

IMPORTANT:

The front edges of the installation brackets

must be level and aligned to each other.

WARNING:

Failure to properly align the

brackets could result in the headrail releasing
from the brackets.

Additional Clearance with Spacer Blocks

NOTE:

A minimum of

⁄

" additional clearance is required for PowerView

and SoftTouch

shadings with a battery wand/rechargeable battery wand.

■

If using

⁄

" or

⁄

" spacer blocks, attach the spacer

block(s) and installation bracket to a flat vertical
mounting surface with #6 screws long enough for
a secure installation.

IMPORTANT:

The solid side of the spacer blocks

must face toward the mounting surface.

Additional Clearance with Extension Brackets

■

If using extension brackets, attach each extension
bracket to the mounting surface using the screws
provided.

■

Attach an installation bracket to the underside of each
extension bracket using the provided screws and
speed nuts.

NOTE:

The maximum amount of added clearance using

extension brackets is 3".

UltraGlide

Shading: Proceed to “STEP 3: Install the Shading” on page 10.

PowerView and SoftTouch Shadings: Proceed to “STEP 2: Mount the

Battery Wand, If Applicable” on page 8.

Spacer

Blocks

Longer

Screws

⁄

" Maximum

Added Clearance

Screw

Extension

Bracket

Speed Nut

Содержание Silhouette DuoLite













































Результаты поиска

Содержание Silhouette DuoLite

Отзывы:

Похожие инструкции для Silhouette DuoLite

Бренды по названию

Популярные бренды

Hunter Douglas Silhouette DuoLite, Установка Эксплуатация Уход

Результаты поиска

Содержание Silhouette DuoLite

Отзывы:

Похожие инструкции для Silhouette DuoLite

Бренды по названию

Популярные бренды