Hunter Douglas Silhouette DuoLite, Установка Эксплуатация Уход

Страница: 23 / 44

OPERATION
21
Express Mode
Activating Express Mode will send the shading to the vanes fully open position or shading
fully open position, bypassing the vanes fully closed position.
Got to Vanes Fully Open Position
■
With the shading stationary, pull and hold the wand down. The shading will begin to move.
■
The shading will pause momentarily and then continue to move.
■
Release the Wand.
■
The Shading will move to the vanes fully open position.
Go to Shading Fully Open Position
■
With the shading stationary, push and hold the wand up. The shading will begin to move.
■
The shading will pause momentarily and then continue to move.
■
Release the wand.
■
The shading will move to the shading fully open position.
Set and Go to a Favorite Position
NOTE:
The default favorite position is the rear shade fully raised and the front shading at
50% open with the vanes closed.
Set a Favorite
With the rear shade fully raised and the front shading vanes closed:
■
Put the shading in motion. With the shading still in motion, as it reaches the desired Favorite
position, push the wand up (or pull the wand down) and hold for approximately 4 seconds.
■
The shading will beep and the front shading moves slightly twice (down, up) to indicate a
new Favorite position is set.
Go to Favorite
■
With the shading stationary, or moving — in a single motion, quickly push the wand up
and pull the wand down and release. The shading will move to the Favorite position.
NOTE: Quickly pulling the wand down and pushing the wand up will also work.