Hunter Douglas Silhouette DuoLite, Установка Эксплуатация Уход

Страница: 31 / 44

OPERATION
29
Problem PowerView
®
and SoftTouch
®
only: Rechargeable battery needs recharging
(continued).
Solution
■
A red light indicator confirms the battery wand is
properly inserted and is charging.
CAUTION:
Do not attempt to plug the
charging cable into the battery mount’s
power socket. Doing so will not only fail
to charge the battery wand but could
possibly cause damage to both the single
charger and the battery mount.
■
Once the battery has been fully recharged, the red light indicator will
turn green. Charging may take up to two hours, depending on your battery
level.
■
Remove the charging cable from the battery wand.
Reinserting the Rechargeable Battery Wand into the Mount
■
Match the direction of the arrow on the underside of the battery wand with
the arrow on the battery mount.
■
Insert the nose of the battery wand into the cavity of the battery mount.
■
Push the battery wand flush into the mount until the battery snaps into
place.
Problem PowerView and SoftTouch only : The rechargeable batter wand is charged
but the shade does not operate.
Solution
If your rechargeable battery wand is charged but not working, it may be due
to its physical location in your window. The rechargeable battery wand can
operate in temperatures up to 176°F (80°C). If the temperature in your window
exceeds this, the safety feature will shut the battery off temporarily. The
battery wand will turn back on, once the temperature lowers into the operable
range.
If you anticipate the rechargeable battery wand consistently exceeding this
temperature limit, please reinstall in a location that avoids direct sunlight.
Not this
socket