Human HumaStar 600, Руководство пользователя

Страница: 90 / 132

HumaStar 600 | User manual
86
Item Input Comments
Wavelength (nm) Mono- or bichromatic measurement; 12 WL
(340 - 800 nm)
Main Select from drop down menu Choose a WL from the installed filters
Side Check and select from drop
down menu or No Check Check to enable a second WL and choose a
WL from the installed filters
Readings
Incubation (sec) 1 to 1500 Only for Fixed Point and Kinetics; time be-
tween the last dispensing and the first
reading
(Reaction) Time (sec) 1 to 1500 Reading time is counted after the addition
of the last fluid
Extra Precision Check / No Check Enpoint (two consecutive readings are
averged; Fixed Point each value is the line-
ar interpolation of two readings, one before
and one after the specified time
Delivery
Volume (µl) Max volume per pipetting 470 µl;
Min/Max reaction volume 180/650 µl
Sample 2 to 100 µl Set in increments of 1 µl
1 st Reagnet 5 to 500 µl Set in increments of 1 µl
2 nd Reagent Check or No Check;
5 to 500 µl
Check the box to use a second reagent; Set
in increments of 1 µl
3
nd
Reagent Check or No Check;
5 to 500 µl
Check the box to use a third reagent;
Set in increments of 1 µl
Time (sec) 1 to 1500 R1 is dispensed at time 0; S, R2 or R3 can be
set variable by insert a different time
Dispense with Check / No Check Check and the drop down menu will be
available
Water / Extra Reagent Water will be added to the reaction/ extra
reagent will be discarded
Extra volume (µl) Max total per dispensing 470 µl
Kit Vol (µl) Reagent volume in the bottle (excluding the
dead volume)
Sample diluent
Used to pre or post dilute a sample/QC/Cal
First drop-down Water/Diluent/Reagent Select from the drop-down
Second drop - down Select from the drop-down According to the above decision, different
diluents (defined in Solutions menu) and the
reagents of this test are availble
Use extra volume Check / No Check Check and the defined extra volume of the
sample diluent will be used and after dis-
pensing discarded
TABLE 11