routIne taSKS
57
5.3.1 ACCEPTANCE OF RESULTS
To confirm the result for a given test open the
Pending Acceptance
Menu
, then select the desired sample test from the list and then press
Accept
. Press
Reject
to reject the test result. To reprocess the reaction just press
Rerun
or
Diluted Replicate
if additional dilution could be useful for confirmation of result.
A dilution factor can be introduced.
5.3.2 REFLEX TESTS
Reflex tests are those automatically launched when a given test is out of deter-
mined limits. Condition for the reflex test launch can be relative to fixed values
or to a reference class.
5.3.3 PRINTOUT OF RESULTS
Results can be printed in different ways and operator has full control on the
display of the results. This is a post run operation and is not related to the online
printing controlled by
Maintenance > Parameter > Software
.
Press the
button from Test Menu Done screen and following submenu
opens:
Printing can be performed on all samples, some filtered or selected. Se-
lection can be made by pressing
Ctrl
Key while pointer is pressed on selected
samples. A range is selected by pressing mouse on the first and then pressing
Shift
key and pointing to the last one of the desired ranges.
There are three types of reports: Continuous - samples are printed out one after
the other; 3 per page - according a fixed report format; Custom - according re-
port made by use of the Report Format Generator, refer to section 3.2.7.2 Modify
reports.
5.3.4 CUVETTE
Report use for service engineers only.
FIGURE 56
Содержание HumaStar 600
