Command Manual – IRF Fabric
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 IRF Fabric Commands
Huawei Technologies Proprietary
1-8
%Apr 2 19:43:24:368 2000 Quidway FTM/3/FTMCHIDAUTO:- 1 -Change unitid to auto
successful, unit 1 removed UnitID from flash!
Unit 2 removed unit ID successfully.
Unit 3 removed unit ID successfully.
Unit 4 removed unit ID successfully.
Unit 5 removed unit ID successfully.
Unit 6 removed unit ID successfully.
Unit 7 removed unit ID successfully.
Unit 8 removed unit ID successfully.
<Quidway> display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 1
UID CPU-Mac Priority Stack-Port Board-ID A/M
*1 00e0-fc00-5002 10 /Right 1 A
2 00e0-fc03-5132 10 Left/ 1 A
3 00e0-fc04-5252 10 /Right 1 A
4 00e0-fc05-8922 10 Left/ 1 A
5 000f-cbb7-2142 10 /Right 1 A
6 000f-cbb7-3264 10 Left/ 1 A
7 000f-cbb7-2260 10 /Right 1 A
8 000f-cbb7-2734 10 Left/ 1 A
From the above example, you can see the priority of each unit restores to 10 and the
numbering mode changes from M (manual numbering) to A (automatic numbering).
1.1.8 fabric-port enable
Syntax
fabric-port interface
-
type interface
-
number
enable
undo fabric-port interface
-
type interface
-
number enable
View
System view
Parameter
interface-type
: Type of the port to be configured as a fabric port. Note that only
GigabitEthernet ports can be configured as fabric ports.
interface-number
: Number of the port to be configured as a fabric port.
Description
Use the
fabric-port enable
command to configure a specified port as a fabric port.
Use the
undo fabric-port enable
command to disable the fabric port function for a port.
When the last fabric port on a switch is disabled, the fabric function is disabled globally.