Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-32
Field
Description
Transit Area
ID of transit area that the virtual link passes, and it cannot be
backbone area, STUB area, or NSSA area
OSPF timers, defined as follows:
Hello
Interval of hello packet
Dead
Interval of dead neighbors
Poll
Interval of poll
Timers
Retransmit Interval
of retransmitting LSA
Transmit Delay
Delay time of transmitting LSA
3.1.26 filter-policy export
Syntax
filter-policy
{
acl-number
|
ip-prefix
ip-prefix-name
}
export
[
routing-protocol
]
undo
filter-policy
{
acl-number
|
ip-prefix ip-prefix-name
}
export
[
routing-protocol
]
View
OSPF view
Parameter
acl-number
: Basic or advanced ACL number.
ip-prefix-name:
Name of the address prefix list.
routing-protocol:
Routing protocol advertising the routing information. At present, it can
be
direct
,
rip,
or
static
.
Description
Use the
filter-policy export
command to configure the rule for filtering the advertised
routing information by OSPF.
Use the
undo filter-policy export
command to cancel the filtering rule configured.
By default, no filtering of the advertised routing information is performed.
In some cases, it may be required that only the routing information meeting some
conditions can be advertised. You can use the
filter-policy
command to set the filtering
conditions for the routing information to be advertised. Only the routing information
passing the filtration can be advertised.
This command affects the external routes imported (with the
import-route
command)
by OSPF. If the
routing-protocol
argument is specified, this command filters only the
imported routes generated by the specified protocol, not affecting the routes generated