Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 6 PIM Configuration Commands
Huawei Technologies Proprietary
6-8
Table 6-3
Description on the fields of the
display pim neighbor
command
Field
Description
Neighbor Address
Neighbor address
Interface
VLAN interface where the neighbor has been discovered
Uptime
Time passed since the multicast group has been discovered
Expires
Specifies when the member will be removed from the group
6.1.8 display pim routing-table
Syntax
display pim routing-table
[ { {
*g
[
group-address
[
mask
{
mask-length
|
mask
} ] ] |
**rp
[
rp-address
[
mask
{
mask-length
|
mask
}
] ] } | {
group-address
[
mask
{
mask-length
|
mask
} ] |
source-address
[
mask
{
mask-length
|
mask
} ] }
*
} |
incoming-interface
{
interface-type interface-number
|
null
} | {
dense-mode
|
sparse-mode
} ]
*
View
Any view
Parameter
**
rp
: (*, *, RP) route entry.
*
g
: (*, G) route entry.
group-address
: Address of the multicast group.
source-address
: IP address of the multicast source.
incoming-interface interface-type interface-number
: View the route entry whose
incoming VLAN interface is the specified VLAN interface.
null
: Specifies the VLAN interface type as Null.
dense-mode
:
Specifies the multicast routing protocol as PIM-DM.
sparse-mode
:
Specifies the multicast routing protocol as PIM-SM.
Description
Use the
display pim routing-table
command to view information about the PIM
multicast routing table.
The displayed information about the PIM multicast routing table includes the SPT
information and RPF information.