Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Static Route Configuration
Commands
Huawei Technologies Proprietary
1-15
Parameter
None
Description
Use the
delete static-routes all
command to delete all static routes.
The system will request your confirmation before it deletes all the configured static
routes.
Related command:
ip route-static
and
display ip routing-table
.
Example
# Delete all the static routes in the router.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] delete static-routes all
Are you sure to delete all the unicast static routes?[Y/N]y
1.2.2 ip route-static
Syntax
ip route-static
ip-address
{
mask
|
mask-length
} {
interface-type
interface-number
|
next-hop
} [
preference
preference-value
] [
reject
|
blackhole
] [
description
text
|
detect-group group number
]*
undo ip route-static ip-address
{
mask
|
mask-length
} [
interface-type
interface-number | next-hop
] [
preference
preference-value
] [
reject
|
blackhole
]
[
description
text
|
detect-group
group number
]*
View
System view
Parameter
ip-address
: Destination IP address, in dotted decimal notation.
mask
:
Mask.
mask-length:
Mask length. Since 1s in a 32-bit mask must be consecutive, a mask in
dotted decimal notation can be replaced by
mask-length
, which is the number of the
consecutive 1s in the mask.
interface-type
interface-number
: Next-hop outgoing interface
.
The packets sent to a
null
interface, which is a virtual interface, will be discarded immediately. This can
decrease the system load.
next-hop
: Next hop IP address of the route, in dotted decimal notation.