![background image](http://html.mh-extra.com/html/huawei/quidway-s3900-series/quidway-s3900-series_command-manual_169831540.webp)
Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-2
1.1.2 attribute
Syntax
attribute
{
ip ip-address
|
mac mac-address
|
idle-cut
second
|
access-limit
max-user-number
|
vlan vlan-id
|
location
{
nas-ip ip-address port port-number
|
port port-number
} }*
undo attribute
{
ip
|
mac
|
idle-cut
|
access-limit
|
vlan
|
location
}*
View
Local user view
Parameter
ip ip-address
: Sets the IP address of the user.
mac mac-address
: Sets the MAC address of the user. Where,
mac-address
is in
H-H-H
format.
idle-cut
second
: Allows the local user to enable the idle-cut function. Where,
second
is the idle time before cutting down, which ranges from 60 seconds to 7200 seconds.
access-limit max-user-number
: Sets the maximum number of users who can access
the switch with current user name. Where,
max-user-number
ranges from 1 to 1024.
vlan vlan-id
: Sets the VLAN attribute of the user (that is, which VLAN the user belongs
to). Where,
vlan-id
is an integer ranging from 1 to 4094.
location
: Sets the port binding attribute of the user.
nas-ip ip-address
: Sets the IP address of the access server to which the user is
bound to. Where,
ip-address
is in dotted decimal notation and is 127.0.0.1
(representing this device) by default. If the user is bound to a remote port, you must
specify the
nas-ip
parameter. If the user is bound to a local port, you need not specify
the
nas-ip
parameter.
port port-number
: Sets the port bound with the user. Where,
port-number
is in the
following format: device ID/slot number/port number; the device ID ranges from 1 to 8,
the slot number ranges from 0 to 15 (if the bound port has no slot number, just input 0
for this item) and the port number ranges from 1 to 255.
Description
Use the
attribute
command to set the attributes of a user whose service type is
lan-access.
Use the
undo attribute
command to cancel attribute settings of the user.
Related command:
display local-user
.
Example
# Set the IP address of user1 to 10.110.50.1.