Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 7 MSDP Configuration Commands
Huawei Technologies Proprietary
7-5
7.1.5 display msdp sa-count
Syntax
display msdp sa-count
[
autonomous-system-number
]
View
Any view
Parameter
autonomous-system-number
: Specifies the AS where a source and group come from.
The value ranges from 1 to 65535.
Description
Use the
display msdp sa-count
command to display the number of sources and
groups in MSDP cache.
The debugging output of this command is available only after the configuration of the
cache-sa-enable
command.
Example
# View the number of sources and groups in MSDP cache.
<Quidway> display msdp sa-count
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
100 3 3
Total Source-Active entries: 5
Table 7-3
Description on the fields of the display msdp sa-count command
Field
Description
Peer's Address
Address of an MSDP peer
Number of SA
Number of SA messages
AS AS
number
Number of source
Number of sources
Number of group
Number of groups