![background image](http://html.mh-extra.com/html/huawei/quidway-s3900-series/quidway-s3900-series_command-manual_169831859.webp)
Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-10
Use the
undo poe mode
command to restore the PoE mode on the current port to the
default mode.
By default, the port is powered through a signal cable.
Note that the S3900 series switches do not support the
spare
mode currently.
Example
# Set the PoE mode on current port to
signal
.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/3
[Quidway-Ethernet1/0/3] poe mode signal
1.1.9 poe power-management
Syntax
poe power
-
management
{
auto| manual
}
undo poe power
-
management
View
System view
Parameter
auto
: Adopts the
auto
mode, namely, a PoE management mode based on PoE priority
of the port.
manual
:
Adopts the
manual
mode.
Description
Use the
poe power
-
management
command to configure the PoE management mode
of port used in the case of power overloading.
Use the
undo poe power
-
management
command to restore the default mode.
By default, the PoE management mode on port is
auto
.
Example
# Configure the PoE management mode on port to
auto
, that is, adopt the PoE
management mode based on the PoE priority of the port.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] poe power-management auto
Auto Power Management is enabled
# Restore the default management mode.