Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-55
time restores the status of the primary server on the switch to the active state
while keeping the status of the secondary server unchanged.
z
When both the primary and secondary servers are in the active state, the switch
sends packets only to the primary server.
Related command:
radius scheme
,
primary authentication
,
secondary
authentication
,
primary accounting
and
secondary accounting
.
Example
# Set the status of the secondary authentication server in RADIUS scheme radius1 to
active.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] state secondary authentication active
1.2.27 stop-accounting-buffer enable
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
RADIUS scheme view
Parameter
None
Description
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the
stop-accounting requests that bring no response.
Use the
undo stop-accounting-buffer enable
command to disable the switch from
buffering the stop-accounting requests that bring no response.
By default, the switch is enabled to buffer the stop-accounting requests that bring no
response.
Stop-accounting requests are critical to billing and will eventually affect the charges;
they are important for both the users and the ISP. Therefore, the switch should do its
best to transmit them to the RADIUS server. If the RADIUS accounting server does
not respond to such a request, the switch should first buffer the request on itself, and
then retransmit the request to the RADIUS accounting server until it gets a response,