Installation Manual
iSiteC BTS3601C CDMA Base Station
Hardware Installation
2
Installing Cabinet Hardware
2-46
1) M6
%
12 assembling bolt
Figure 2-47
Fixing the sun-shading cover
Installing the box on steel platform:
&
Note:
Procedure to install the box on steel platform is similar to that on concrete floor.
1)
Install the fixing support onto the battery box via 4 M12
%
20 assembling bolts, as
shown in Figure 2-42.
2)
Place the box on the platform and mark positions on the platform for all 4
connection holes in the fixing support.
3)
Drill holes using a percussion drill with the bit of
v
16. After the drilling, remove the
dust inside and outside the holes with a vacuum cleaner, and then check the
distance among holes. Whenever big errors occur, the relevant holes must be
relocated and drilled again.
