HPE ProLiant e910, Руководство пользователя и по обслуживанию

Страница: 92 / 182

This value sets the task expiration date and time.
The selected date and time are displayed in the To box.
How tasks in the installation queue are processed
When you add a task to the installation queue:
• It is added to the end of the queue.
• If you added a command, the task is initiated after existing queued tasks finish.
• If you added a component, the task is initiated after:
◦ Existing queued tasks finish.
◦ The software that initiates installation for the selected component type detects a pending installation.
If the installation queue is empty and iLO can initiate the update, the update begins immediately.
To determine the software that can initiate an update, check the component details on the iLO Repository and
Installation Queue pages.
• If a previously queued task is waiting to start or finish, a new task might be delayed indefinitely. For example, there might
be a queued component waiting until the UEFI BIOS detects it during server POST. If the server is not restarted, the tasks
that follow this task in the queue will remain on hold indefinitely.
• If the task expires before the start time of a task that precedes it in the installation queue, iLO will not save the task.
• If an update is not initiated within the specified time window, it expires. If the update expires, delete and then recreate the
task, or edit the task.
Editing a task in the installation queue
Prerequisites
• The Configure iLO Settings privilege is required for editing tasks in the installation queue.
• The Recovery Set privilege is required for making an optional update to the System Recovery Set after a queued update is
completed successfully.
• If you want to use the Update Recovery Set feature, a System Recovery Set must exist and contain the component you
want to update.
• The task you want to edit is in Pending status.
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click the Installation Queue tab.
2. Click next to the task you want to edit.
iLO prompts you to update the task information.
3. To update the task name, enter a new name (up to 64 characters) in the Task name box.
4. Select a value in the Component or Command box.
92 Using HPE iLO 5