Operation
2-17
The host software should be able to release the magazine without shutting down. If host
computer failure prevents the host from releasing the lock, cycle power to the Library.
IMPORTANT:
If you are still unable to open the magazine door, see “ Emergency Magazine Removal,”
later in this chapter.
cc0056
1
En
ter
Esc
ape
Re
ady
Use
Cle
ane
r
Driv
e
Fau
lt
Loa
der
Fau
lt
Magazine In
Place
Figure 2-4. Magazine in place
Removing the Magazine
Whenever a magazine is installed inside the module it is locked in place to prevent tampering or
accidental removal. To remove the magazine, enter the Menu Mode by pressing the Enter
Enter
Enter
Enter button
at the Default screen. At the Main menu, select Remove Magazine, and press the Enter
Enter
Enter
Enter button.
The magazine door swings open.
Emergency Magazine Removal
If a fault occurs that prevents removal of the magazine, turn the power off for five seconds.
Power up while continuously pressing the
p
button. Continue to hold the button until all of the
indicators on the control panel light, then go out. Release the button. The door swings open.
