Operation
2-7
Default Screen
After the POST diagnostics have concluded successfully and initialization is complete, the
following Default screen appears. Note that the Default screen consists of two pages.
Page 1 Default screen:
Loader Idle
Drv0: Ready or No Tape
Drv1: Idle
Page 2 Default screen:
Loader Idle
0
_ _ _ _ _ _ _
9
10
_ _ _ _ _ _ _
18
Page 1 displays the library and drive status. Page 2 displays the library status (Line 1) and
magazine slot status (Lines 3 and 4).
The library status lines show each slot as a rectangle. A solid block indicates that a cartridge is
present. A hollow block indicates that a slot is empty.
Line 4 also shows the status of the mail slot. A
symbol indicates that a cartridge is in the mail
slot. A
symbol indicates that the mail slot is empty.
The
F
F
F
F
, and
G
G
G
G
buttons control which Default page is displayed.
Fault Screen
When a fault is detected, a screen similar to the one shown appears. In addition, either the Drive
Fault or the Loader Fault LED on the control panel lights.
Fault Code: 3004
Elevator Jammed
Power Down to Clear
The first line shows a numerical FSC. The second line shows a brief description of the error.
The third and fourth lines contain a one- or two-line message describing the initial ERP.
For a list of FSCs and ERPs, see Chapter 4, “Troubleshooting.”
