HP ZBook 17 G3, Руководство по техническому обслуживанию и ремонту

Страница: 49 / 201

Reverse this procedure to install the battery.
Hard drive
NOTE: The hard drive spare kit does not include the hard drive bracket or hard drive cable. The hard drive
bracket, screws, and hard drive cable are included in the Hard Drive Hardware Kit, spare part number
848351-001.
Description Spare part number
500 GB 5400 RPM SATA RAW Hybrid 8 GB cache 7 mm 732000-001
1 TB 7200 RPM SATA RAW 9.5 mm 766644-001
500 GB 7200 RPM SATA FIPS RAW 7 mm 820572-001
500 GB 7200 RPM SATA SED RAW 7 mm 820573-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see Service door on page 33 ).
5. Disconnect the battery cable from the system board (see Battery on page 34 ).
Remove the hard drive:
1. Lift the hard drive connector (1), and then release the hard drive cable (2) from the guide.
2. Loosen the four captive screws (3) that secure the hard drive to the bottom cover.
Component replacement procedures 35