6.
Return the drive cage to the down position
7.
Replace the computer cover.
Primary 3.5-inch Internal Hard Drive
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 34
).
2.
Remove the computer cover (
Computer Cover on page 38
).
3.
Raise the drive cage to the upright position.
4.
Disconnect the data cable
(1)
and power cable
(2)
from the back of the primary hard drive.
Figure 6-40
Disconnecting the Hard Drive Data and Power Cables
5.
Remove the four screws on top of the drive cage that secure the hard drive in the bay.
Figure 6-41
Removing the Hard Drive Retainer Screws
64
Chapter 6 Removal and Replacement Procedures
Содержание Rp3000 - Point of Sale System
Страница 1: ...Service Reference Guide HP rp3000 Point of Sale ...
Страница 4: ...iv About This Book ...
