3.
Raise the drive cage to the upright position.
Figure 6-11
Rotating the Drive Cage Up
4.
Locate the memory module sockets on the system board.
WARNING!
To reduce risk of personal injury from hot surfaces, allow the internal system
components to cool before touching.
5.
Open both latches of the memory module socket
(1)
, and insert the memory module into the
socket
(2)
.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
6.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position
(3)
.
Figure 6-12
Installing a DIMM
44
Chapter 6 Removal and Replacement Procedures
Содержание Rp3000 - Point of Sale System
Страница 1: ...Service Reference Guide HP rp3000 Point of Sale ...
Страница 4: ...iv About This Book ...
