HP ProLiant XL230a Gen9 Скачать руководство пользователя страница 77

Страница: 77 / 80

Index 77

drive cabling 44
drive cage assembly, removal 16

drive cage, removing   16
drive LEDs   11
drive numbering   10, 25

driver installation procedures 56
drivers 56

drives   11, 14
drives, determining status of   11
drives, installing   25

electrical 63

electrostatic discharge   63
embedded UEFI shell   53
enabling the Trusted Platform Module   42

enabling, Trusted Platform Module (TPM) 42
environmental requirements 64

Erase Utility   46, 49
error messages   58
EuroAsian Economic Commission   61

European Union notice 61
external USB functionality 55

features 6, 54
Federal Communications Commission (FCC)

notice 61

firmware 56
firmware update 51, 56

firmware, updating 51, 56
firmware, upgrading 56

flexible boot control   52
FlexibleLOM adapter   26
front panel buttons   7

front panel components   6
front panel display cable   45
front panel LED board assembly cabling   45

front panel LEDs 7

grounding methods 63
grounding requirements 63

hardware installation 25
hardware options 25

hardware options installation 25

health driver 55
health LED 7

help resources   65
hot-plug drive, installing   25
HP contact information   65

HP iLO 46
HP Insight Diagnostics 49

HP Insight Diagnostics survey functionality   49
HP Insight Online   46, 50
HP Insight Online direct connect   51

HP Insight Remote Support software 50, 57
HP Management Packs 1.1 for MOM 2005,

troubleshooting 58

HP Management Packs 1.2 for MOM 2005,

troubleshooting 58

HP RESTful API   48
HP Service Pack for ProLiant   46, 49, 51
HP SIM (HP Systems Insight Manager)   48, 49

HP Smart Storage Administrator (HP SSA) 54
HP Smart Update Manager overview 46, 51

HP SmartMemory   31
HP SSA (HP Smart Storage Administrator)   46, 54
HP Systems Insight Manager (SIM)   48, 49

HP technical support   57, 65
HP Trusted Platform Module option   40
HP website   65
HP, contacting   65
humidity   64

I/O module 11, 12, 26
I/O module bay numbering 11

I/O module slot definitions 12
I/O module, installing 26, 28

identifying components   6
iLO (Integrated Lights-Out)   46, 47, 48
iLO 4 (Integrated Lights-Out 4)   46

IML (Integrated Management Log) 46, 48
Insight Diagnostics 49, 56

Insight Online direct connect   51
installation, chassis   21
installation, server options   25

installing a DIMM   34
installing hardware   25
installing operating system   24

installing server blade options 25
installing server options 21, 25

installing software   24
installing the chassis   21
installing the processor air baffle   18

Содержание ProLiant XL230a Gen9

















































































Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы:

HP ProLiant XL230a Gen9, Руководство пользователя, Страница: 77 / 80

Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы: