Hardware options installation 28
5.
Using a T-10 Torx screwdriver, install the I/O module FlexibleLOM adapter.
6.
Install the I/O module.
7.
Install the server into the chassis ("
" on page
8.
Connect all peripheral cables to the server.
9.
Press the Power On/Standby button.
The server powers down and enters standby mode. The system power LED changes from green to
amber. Power is still applied to the server.
HP Ethernet Dual 1Gb 1-port 364i Adapter option
I/O modules are specific to each server and are installed in the rear of the chassis. For more information
about product features, specifications, options, configurations, and compatibility, see the product