HP ProLiant XL230a Gen9 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 80

background image

Software and configuration utilities 55

ROMPaq utility

The ROMPaq utility enables you to upgrade the system firmware (BIOS). To upgrade the firmware, insert a
ROMPaq USB Key into an available USB port and boot the system. In addition to ROMPaq, Online Flash
Components for Windows and Linux operating systems are available for updating the system firmware.
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available firmware
revisions.
For more information, go to the HP website Drivers, Software

& Firmware

. Then, enter your product name in the

Find an HP product

field and click

Go

.

Automatic Server Recovery

ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such as
a blue screen, ABEND, or panic. A system fail-safe timer, the ASR timer, starts when the System Management

driver, also known as the Health Driver, is loaded. When the operating system is functioning properly, the
system periodically resets the timer. However, when the operating system fails, the timer expires and restarts

the server.
ASR increases server availability by restarting the server within a specified time after a system hang. You can
disable ASR from the System Management Homepage or through UEFI System Utilities.

USB support

HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by

the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB
devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available normally.
Specifically, HP provides legacy USB functionality for the following:

•

POST (system boot)

•

UEFI System Utilities

•

Pre-boot UEFI shell

•

DOS

•

Operating environments which do not provide native USB support

External USB functionality

HP provides external USB support to enable local connection of USB devices for server administration,
configuration, and diagnostic procedures.
For additional security, external USB functionality can be disabled through USB options in UEFI System
Utilities.

Redundant ROM support

The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server has

a single ROM that acts as two separate ROM images. In the standard implementation, one side of the ROM
contains the current ROM program version, while the other side of the ROM contains a backup version.

«
...
53
54
55
56
57
...
»

Содержание ProLiant XL230a Gen9

















































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant XL230a Gen9

ColorPASS-Z5000

Бренд: Canon Страницы: 130

OfficeConnect 3C19500

Бренд: 3Com Страницы: 52

Бренд: SafeNet Страницы: 109

totalstorage 200

Бренд: IBM Страницы: 180

Бренд: IBM Страницы: 200

FlexWATCH 1110L

Бренд: Seyeon Technology Страницы: 96

SUPERSERVER 6015C-NT

Бренд: Supermicro Страницы: 110

Бренд: Sony Страницы: 3

Бренд: Sony Страницы: 7

Бренд: Sony Страницы: 26

Бренд: Sony Страницы: 28

Бренд: Sony Страницы: 37

Бренд: Sony Страницы: 36

Бренд: Sony Страницы: 49

Бренд: Sony Страницы: 48

Бренд: Sony Страницы: 54

Бренд: Sony Страницы: 56

StorStation FSV-M3

Бренд: Sony Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды