background image

 

Software and configuration utilities  49 

Intelligent Provisioning 

This server does not support OS installation using Intelligent Provisioning. For more information about 
installing the OS on this server, see "Installing the operating system (on page 

24

).

Intelligent Provisioning is a single-server deployment tool embedded in HP ProLiant Gen8 and later servers 

that simplifies HP ProLiant server setup, providing a reliable and consistent way to deploy HP ProLiant server 
configurations: 

 

Intelligent Provisioning assists with the OS installation process by preparing the system for installing 
"off-the-shelf" and HP branded versions of operating system software and integrating optimized HP 

ProLiant server support software. 

 

Intelligent Provisioning provides maintenance-related tasks using the Perform Maintenance window. 

 

Intelligent Provisioning provides installation help for Microsoft Windows, Red Hat and SUSE Linux, and 
VMware operating systems. For specific OS support, see the 

HP Intelligent Provisioning Release Notes

 

on the HP website For more information about Intelligent Provisioning software, see the HP website 
see the Resources tab on the HP website update packages, see the HP Smart Update: Server Firmware and Driver Updates page on the HP website 
 

HP Insight Diagnostics 

HP Insight Diagnostics is a proactive server management tool, available in both offline and online versions, 

that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify server 
installations, troubleshoot problems, and perform repair validation. 
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS 
is not running. To run this utility, boot the server using Intelligent Provisioning (on page
 

49

). 

HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and 

other related data needed for effective server management. Available in Microsoft Windows and Linux 
versions, the utility helps to ensure proper system operation. 
For more information or to download the utility, see the HP website Insight Diagnostics Online Edition is also available in the SPP ("

HP Service Pack for ProLiant

" on page 

51

). 

 

HP Insight Diagnostics survey functionality 

HP Insight Diagnostics (on pag

49

) provides survey functionality that gathers critical hardware and software 

information on ProLiant servers. 
This functionality supports operating systems that are supported by the server. For operating systems 

supported by the server, see the HP website If a significant change occurs between data-gathering intervals, the survey function marks the previous 

information and overwrites the survey data files to reflect the latest changes in the configuration. 
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation, 
or it can be installed through the SPP 
("

HP Service Pack for ProLiant

" on page 

51

). 

 

Erase Utility 

   

Содержание ProLiant XL230a Gen9

















































































Отзывы: