HP ProLiant XL230a Gen9, Руководство пользователя

Страница: 40 / 80

Hardware options installation 40
15.
Install the heatsink.
16.
Install the processor air baffle (on page 18 ).
17.
Install the server into the chassis (" Install the server " on page 19 ).
18.
Connect all peripheral cables to the server.
19.
Press the Power On/Standby button.
The server powers down and enters standby mode. The system power LED changes from green to
amber. Power is still applied to the server.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page 41 ).
2.
Retaining the recovery key/password (on page 42 ).
3.
Enabling the Trusted Platform Module (on page 42 ).
Enabling the TPM requires accessing RBSU. For more information about RBSU, see the HP website
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.