HP ProLiant XL230a Gen9 Скачать руководство пользователя страница 11

Страница: 11 / 80

Component identification 11

Item

Description

Drive box 2, drive bay 1

Drive box 2, drive bay 2

Hot-plug drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.

Flashing
amber/green

The drive is a member of one or more logical drives and predicts
the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

I/O module bay numbering

I/O modules are specific to each server and are installed in the rear of the chassis.

Содержание ProLiant XL230a Gen9

















































































Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы:

Похожие инструкции для ProLiant XL230a Gen9

Бренды по названию

Популярные бренды

HP ProLiant XL230a Gen9, Руководство пользователя

Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы:

Похожие инструкции для ProLiant XL230a Gen9

Бренды по названию

Популярные бренды