HP ProLiant Gen9 Скачать руководство пользователя страница 58

Страница: 58 / 410

HP ProLiant server errors 58

Possible cause:

The processor failed to power on.

Actions:

•

Cycle power on the system

•

Reseat the processor

•

If the issue persists, contact HP Service.

246– IMPORTANT: The system has exceeded the amount of available Option ROM
space.

...The Option ROM for one or more devices cannot be executed.
Action: Disable unneeded Option ROMs (such as PXE).

Possible cause:

The amount of available Option ROM space was exceeded.

Action:

Disable any unneeded Option ROMs.

247– Memory Initialization Error

.– Ultra-Low Voltage (1.25V) and Standard Voltage (1.5V) DIMMs are mixed in the same system. No common voltage
available.

Action: Remove 1.25V or 1.5V DIMMs as mixing these types is not supported.

Possible cause:

Ultra-Low voltage and Standard voltage DIMMs are mixed in the system.

Action:

Remove either the 1.25V or the 1.5V DIMMs.

248– Unsupported Option Card configuration. The option card installed in Slot X is
only supported in Slot Y.

Action: Move the option card from Slot X to Slot Y.

Possible cause:

The option card is not supported in the slot indicated in the error message.

Action:

Move the option card to the slot indicated in the error message.

249– Unsupported Option Card configuration. The option card installed in Slot X is

not supported unless Slot Y is unpopulated.

Action: Move the Option Card in Slot X to a different slot or remove the card in Slot Y.
- System Halted!

Possible cause:

There is an unsupported option card configuration in the system.

Action:

Move the option card that is indicated in the error message to a different slot or remove the option

card indicated in the error message.

250- Unsupported Processor Configuration Detected

...The installed processors are only supported in single processor configurations.

Action:

Remove all processors except for Processor 1.

251- IMPORTANT: Switches SW1 and SW3 are ON

...This is only used to recover iLO functionality.

Содержание ProLiant Gen9



























































































































































































































































































































































































































Результаты поиска

Содержание ProLiant Gen9

Отзывы:

Бренды по названию

Популярные бренды

HP ProLiant Gen9, Руководство по устранению неисправностей

Результаты поиска

Содержание ProLiant Gen9

Отзывы:

Бренды по названию

Популярные бренды