HP ProLiant Gen9 Скачать руководство пользователя страница 106

Страница: 106 / 410

HP Smart Array errors 106

1 - Amber

2 - Green

3 - Green

Interpretation

Off

The current backup is complete with no errors.

Flashing once

per second

Flashing once
per second

Off

The current backup failed, and data has been lost.

Flashing once
per second

A power error occurred during the previous or current
boot. Data may be corrupt.

Flashing once

per second

Off

An overtemperature condition exists.

Flashing twice

per second

Flashing twice

per second

Off

The battery is not connected to the system board.

Flashing twice

per second

Flashing twice
per second

The battery has been charging for 10 minutes, but has
not reached sufficient charge to perform a full backup.

Off

The current backup is complete, but power fluctuations
occurred during the backup.

The cache module microcontroller has failed.

Smart Array Windows Event Log messages

Message identifiers 24578-24599

Message Id: 24578

Severity: Informational
Log message:

The HP Smart Array SAS/SATA event notification service version %1.

Message Id: 24579

Severity: Informational
Log message:

An event queue overflow has occurred for the array controller

<controller name / slot information>. At least one event has been lost. This

controller will only queue up to 100 events.

Message Id: 24580

Severity: Error
Log Message:

The HP Smart Array SAS/SATA Event Notification Service needs to be

upgraded and cannot process events at this time. The service is being stopped

and processing of HP Smart Array controller events to the Windows system event

log, ProLiant Integrated Management Log (IML) and Integrity System Event Log (SEL)

will not occur until the software is updated.

To upgrade your software, please visit

http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

Message Id: 24581

Severity: Informational
Log message:

The HP Smart Array SAS/SATA event notification service <status

message>.

<status message> values:

Содержание ProLiant Gen9



























































































































































































































































































































































































































Результаты поиска

Содержание ProLiant Gen9

Отзывы:

Бренды по названию

Популярные бренды

HP ProLiant Gen9, Руководство по устранению неисправностей

Результаты поиска

Содержание ProLiant Gen9

Отзывы:

Бренды по названию

Популярные бренды