HP OmniBook 4100 Скачать руководство пользователя страница 96

Страница: 96 / 148

Using the Recovery CD

Installing Retail Windows 95

1-96

To install video support for retail Windows 95

If you’ve installed a

retail

version of Windows 95, you’ll need to install video support.

The driver is located on the OmniBook’s hard drive or on the

Recovery CD

in the

\Omnibook\Drivers\Win95\Video directory.

1. From Control Panel, double-click Display, then click Settings.

2. Click Change Display Type.

3. Under Adapter Type, click Change.

4. Click Have Disk.

5. Enter the directory of the video drivers, then click OK. You may need to specify

the Disk1 directory.

6. Click OK to select NeoMagic MagicGraph 128XD. If prompted for the second

disk, specify the Disk 2 directory.

7. Under Monitor Type, click Change.

8. Choose Laptop Display Panel (1024x768), then click OK.

9. Click Close, and then Close again. Click Yes to restart the computer.

10. After reboot, re-enter the Display Properties window and click Settings.

11. Set the Desktop Area to 1024 by 768.

12. Choose True Color if desired.

13. Click Close in Display Properties, then click Yes to restart the computer now.

Содержание OmniBook 4100





















































































































































Результаты поиска

Содержание OmniBook 4100

Отзывы:

Похожие инструкции для OmniBook 4100

Бренды по названию

Популярные бренды

HP OmniBook 4100, Справочное руководство

Результаты поиска

Содержание OmniBook 4100

Отзывы:

Похожие инструкции для OmniBook 4100

Бренды по названию

Популярные бренды