manualshive.com logo in svg

HP OmniBook 4100, Справочное руководство

Поделиться
Скачать
HP OmniBook 4100 Скачать руководство пользователя страница 42

Operating the OmniBook

Checking the Status of the OmniBook

1-42

Checking the Status of the OmniBook

This section describes how to interpret the status lights.

To interpret the status lights

The OmniBook has status lights that report power status and drive activity. When the
floppy disk drive is installed in the module bay, the following lights are present on
the front of the OmniBook.

  1.  Floppy disk drive light.

 • 

Steady green light. Floppy disk is being read from or written to.

  2.  Power status light.

 • 

Steady green light. OmniBook is on.

 • 

Steady amber light. OmniBook is in Standby or Suspend mode.

 • 

No light. OmniBook is in Off or Hibernate mode.

 • 

Alternating green and amber light. OmniBook failed when resuming.

  3.  Hard disk drive activity light.

 • 

Steady green light. OmniBook is accessing the hard disk drive.

  4.  Charging status light.

 • 

Steady green light. AC adapter connected, battery full.

 • 

Blinking green light. AC adapter connected, battery charging.

 • 

No light. AC adapter not connected.

Содержание OmniBook 4100





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды