manualshive.com logo in svg

HP OmniBook 4100, Справочное руководство

Поделиться
Скачать
HP OmniBook 4100 Скачать руководство пользователя страница 74

Making Connections

Using PC Cards

1-74

Using PC Cards

This section describes how to

♦ 

Insert and remove a PC Card.

♦ 

Select a compatible PC Card from a list of tested cards.

To insert and remove a PC Card

Note

Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0,
make sure you’ve installed Card Executive (see page 1-106 for instructions).

The OmniBook PC Card slots are available for storing data and expanding the
communication capabilities of the OmniBook. The OmniBook supports standard
Type I, II, and III PC Cards (PCMCIA and CardBus). You can use two Type I or II
cards or one Type III card. Both slots support Zoomed Video, which allows
high-quality multimedia presentations.

  1.  Hold the card with its face up and its connector holes toward the card slot.

  2.  Slide the PC Card into the slot until it is flush with the OmniBook.

  3.  To remove the card, click the PC Card indicator in the taskbar, then click Stop

(for Windows 95 only). This protects your data and avoids unexpected
problems. You can restart the card by removing it, then inserting again.

  4.  Press the eject button to pop the card out.

 

Содержание OmniBook 4100





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды