manualshive.com logo in svg

HP OmniBook 4100, Справочное руководство

Поделиться
Скачать
HP OmniBook 4100 Скачать руководство пользователя страница 68

Making Connections

Connecting External Devices

1-68

To identify connectors for external devices

The following graphic describes the available connectors for external devices. Refer
to it, if necessary, when following the procedures in this section.

  1.  Infrared port. Windows NT 4.0 does not support infrared communication.

 

Use this port for wireless data transmission between the OmniBook and another
computer or a printer with an infrared port. You must install infrared drivers.

  2.  Kensington lock slot (security connector).

 3. 

Parallel port (LPT1).

 

Use this port for a parallel printer, other parallel device, or to connect the floppy
disk drive externally.

  4.  Serial port (COM1).

 

Use this port for a serial mouse, a modem, a serial printer, or other serial device.

  5.  External monitor port.

 6. Docking port.

Содержание OmniBook 4100





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды