HP OmniBook 4100, Справочное руководство

Страница: 120 / 148

Troubleshooting
Solving Problems
1-120
If the battery doesn’t charge
•
Make sure the ac adapter is plugged into the power source.
•
Check that the light on the ac adapter is on.
•
Check that the battery is fully installed and locked in place.
•
Turn off the OmniBook, then check that the battery contacts are clean and that
the ac adapter cables are fully plugged in.
•
Move the OmniBook away from any nearby heat source. Unplug the ac adapter
and allow the battery to cool down. An elevated battery temperature prevents
charging.
•
If available, try another battery and ac adapter.
If the second battery doesn’t charge
•
The OmniBook’s second battery doesn’t charge until the main battery is fully
charged.
•
Make sure the ac adapter is plugged into the power source.
•
Check that the light on the ac adapter is on.
•
Check that the second battery module is fully installed and locked in place.
If the OmniBook stops responding
•
Press CTRL+ALT+DEL to end the application that is not responding.
•
Press the blue power button to suspend the OmniBook. Then press the blue
button again to turn the OmniBook back on.
•
If nothing happens, insert a paper clip into the system-off button on the right side
of the OmniBook. Then press the blue button to turn the OmniBook on.
If the OmniBook doesn’t suspend as expected
•
If you have a connection to another computer, the OmniBook doesn’t suspend if
the connection is actively in use.
•
If the OmniBook is performing an operation, it normally waits for the operation
to finish.