manualshive.com logo in svg

HP OMNIBOOK 3000, Руководство по обслуживанию

Поделиться
Скачать
HP OMNIBOOK 3000 Скачать руководство пользователя страница 28

2-10

Removal and Replacement

HP OmniBook 3000

 8. For the inverter/MB cable emerging from the right hinge, unplug the cable from the motherboard.

 9. Remove the four screws from the hinges, and lift off the display assembly.

 

 

 Figure 2-8. Removing the Icon PCA and Display Assembly

Reassembly Notes

 • 

After connecting the inverter/MB cable from the right hinge, carefully dress the wires into the
cutout and support in the case.

 Caution

 Use a 

5 mm

 screw to fasten the grounding lug through the LVDS PCA. If you use a longer screw,

it will damage the motherboard.

 Do not overtighten the grounding screw for the LCD/LVDS cable from the left hinge. It fastens to
a sheet-metal bracket and the threads could strip.

 • 

Insert the right end of the icon PCA between the plastic tabs on the case. Check that the IR/icon
cable is not pinched and emerges above the PCA.

 • 

Slide the open end of the hinge cover onto the hinge, then lift the closed end over the bump and slide
it in.

Icon PCA
F1391-60911

Screw, M2.5×

8mm

F1391-60957 (4)

Screw, M2.5×

5mm

F1391-60951 (2)

Содержание OMNIBOOK 3000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды