manualshive.com logo in svg

HP OMNIBOOK 3000, Руководство по обслуживанию

Поделиться
Скачать
HP OMNIBOOK 3000 Скачать руководство пользователя страница 14

1-8

Product Information

HP OmniBook 3000

Mass Storage

4.0-billion-byte or 2.1-billion-byte removable hard drive.
1.44-MB internal/external floppy drive (swap with optional 20X CD-ROM drive or
optional second battery).
Optional 20X CD-ROM drive (20X maximum, 14X average).

RAM

16-MB RAM on motherboard.
Two slots for RAM expansion up to 144 MB.

Audio System

16-bit, Sound Blaster Pro-compatible.
MIDI support with optional port replicator.
Stereo sound via two built-in speakers.
Built-in microphone.
Line-in, line-out, and microphone-in.
3D enhanced audio.

Keyboard and
Pointing Device

87/88-key touch-type QWERTY keyboard.
Embedded numeric keypad.
12 function Fn keys.
TouchPad.

Input/Output

Universal Serial Bus (USB).
9-pin, 115,200-bps serial (16550 UART).
25-pin bidirectional ECP/EPP parallel.
Video-out (up to 1024 × 768 × 64K colors) at up to 75-Hz refresh rate.
PS/2 keyboard/mouse.
4-Mbps IrDA-compliant infrared.

Expandability

One Type III or two Type II 16-/32-bit PC Card slots.
CardBus enabled.
Plug-in module bay for floppy drive or optional accessory modules.
Optional port replicator with two USB, serial, parallel, video-out (up to 1024 × 768 ×
64K colors), keyboard, PS/2 mouse, audio, MIDI/joystick, and power-in ports.

Preinstalled Software

Microsoft Windows 95.
Windows 95-compatible Plug and Play.
Advanced Power Management (APM 1.2).
DMI 1.1 under Windows 95 with HP TopTools.
MacAfee VirusScan.
Online documentation.
OmniBook Recovery CD-ROM included.
Centralized worldwide BIOS and driver update service.

Windows NT Support

Windows NT 4.0 certified.
APM 1.2 and PC Card Plug-and-Play support for Windows NT 4.0.

Security Features

Password protection.
DMI-accessible electronic serial number.
Kensington Microsaver lock slot.

Environmental Limits

Operating temperature: 5 to 35 °C (41 to 95 °F).
Operating humidity: 20 to 90 percent RH (5 to 35 °C).
Storage temperature: –20 to 50 °C (–4 to 122 °F).

OmniBook Models

  F1391A
  F1392A

HP OmniBook 3000 CTX 5/200 Model 2100, XGA TFT display.
HP OmniBook 3000 CTX 5/233 Model 4000, XGA TFT display.

Содержание OMNIBOOK 3000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды