47
8 Connecting the Monitor, Keyboard,
Mouse, and UPS
Connect the monitor, keyboard, and mouse cables and the AC power cord to the
appropriate connectors on the rear of the chassis. Use the power cord strain relief
clamp to secure the power cord. When connecting the HP NetServer E 60 to
peripherals, use the cable ties and labels that come with the product (see
Figure 8-1).
If you are using a switch box to connect one monitor, keyboard and mouse to a
number of servers, refer to the instructions that came with the switch box.
External SCSI
Port Knock-out
Video
SVGA
Power
Keyboard
Mouse
Serial A
Parallel Port
Serial B
LAN RJ45
Power Cord
Strain Relief
Figure 8-1. Rear Panel Ports
If you have an uninterruptible power supply (UPS), refer to the instructions
supplied with it. Install and turn on the UPS.
The HP NetServer E 60 performs a diagnostic test when it is connected to an
external power source, and then performs another test when the power switch is
turned on. If an error condition occurs, note any error code appearing on the
display, then refer to Chapter 12, "Troubleshooting."
