Hardware options installation 74
b.
Be sure the snap locks in place.
5.
Install the server into the rack ("
Installing the server into the rack
" on page
37
).
Rack-to-tower conversion
The rack-to-tower conversion kit includes all equipment required to convert the rack model server into a
tower model server.
The rack-to-tower conversion kit includes:
•
Tower bezel
•
Painted tower top cover
•
Casters (4)
•
Tower bezel retention clips (2)
•
Caster screws [8-32 Torx T-15 (12)]
•
Tower cover screws [6-32 x 1/4 Torx T-15 (2)]
•
Painted access panel
In addition to the items supplied in the conversion kit, you will also need a Torx T-15 screwdriver (clipped
to the rear panel of the server)
Before proceeding with the rack-to-tower conversion:
1.
Power down the server (on page
27
).
2.
Remove the power supply cables from the server ("
Redundant hot-plug power supply
" on page
49
).
3.
Remove all external cables from the rear panel of the server ("
Rear panel components
" on page
10
).
4.
Remove all cables from the cable management arm.
5.
Remove all power supplies from the server (to decrease the weight) ("
Redundant hot-plug power
supply
" on page
49
).
6.
Remove all hard drives from the server (to decrease the weight).
Содержание ML570 - ProLiant - G2
