manualshive.com logo in svg

HP Integrity rx6600, Руководство пользователя и обслуживания

HP Integrity rx6600 - надежный сервер с высокой производительностью. Обновление документации, руководства и инструкции доступны для бесплатного скачивания с manualshive.com. Получите актуальные руководства для вашего устройства прямо сейчас.

Поделиться
Скачать
background image

4 Booting and Shutting Down the Operating System

This chapter covers procedures for booting and shutting down operating systems on entry class
HP Integrity servers. HP supports the following operating systems:

•

HP-UX 11i Version 2 (B.11.23)

•

HP OpenVMS I64

•

Microsoft Windows Server 2003

•

Red Hat Enterprise Linux 4

•

SuSE Linux Enterprise Server 9

Configuring System Boot Options

This section discusses the configurable server boot options on entry-class HP Integrity servers,
including the boot options list and the autoboot setting for the server. The version shown is EFI Boot
Manager version 2.00.

•

Boot Options List

The boot options list is a list of loadable items available for you to choose from the EFI Boot
Manager menu. Ordinarily the boot options list includes the EFI Shell and one or more operating
system loaders.

The following example includes boot options for HP-UX, Linux, and the EFI Shell.

                   EFI Boot Manager ver 2.00 [14.62]                            
OS might use only the primary console set via boot manager or conconfig command 
                                        /----------------------------------\    
  /----------------------------------\  |       System Overview            |    
  |            Boot Menu             |  |   hp server BL870c               |    
  | HP-UX Primary Boot: 0/2/1/0....  |  | Serial #:  USE7234MV8            |    
  | Internal Bootable DVD            |  |                                  |    
  | EFI Shell [Built-in]             |  | System Firmware:  3.01 [4739]    |    
  | iLO Virtual Media                |  | BMC Version:      5.20           |    
  | Core LAN Port 1                  |  | MP Version:       T.02.17        |    
  | SuSE on fs0:                     |  | Installed Memory: 6144 MB        |    
  | HP-UX 11.31 from SAS disk        |  |                                  |    
  | -------------------------------  |  |  CPU  Logical                    |    
  | Boot Configuration               |  | Module CPUs   Speed  Status      |    
  | System Configuration             |  |    0    2    1.4 GHz Active      |    
  | Security Configuration           |  |    1    2    1.4 GHz Active      |    
  |                                  |  |                                  |    
  \----------------------------------/  |                                  |    
                                        |                                  |    
                                        |                                  |    
                                        \----------------------------------/    

Use ^ and v to change option(s). Use Enter to select an option                 

To correctly view the operating system console messages:
1.

Go to the Boot Configuration Menu under the EFI Boot Manager menu.

2.

From the Boot Configuration Menu, select Console Configuration.

The Console Configuration screen displays the current configuration of the system console.

                   EFI Boot Manager ver 2.00 [14.62]                            
OS might use only the primary console set via boot manager or conconfig command 
                                        /----------------------------------\    
  /----------------------------------\  |       System Overview            |    
  |       /-----------------------------------------------------------\    |    
  | HP-UX |                   Console Configuration                   |    |    
  | In/---| P  Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600    |    |    
  | EF|^  | NC VGA    Acpi(HWP0002,PNP0A03,0)/Pci(4|0)                |    |    
  | iL| Ad|                                                           |    |    
  | Co| Ed\-----------------------------------------------------------/    |    
  | Su| Remo                                                               |    
  | HP| Edit O/---------------------------------------------------\        |    

118

Booting and Shutting Down the Operating System

Содержание Integrity rx6600





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Integrity rx6600

Hanwha Techwin SBO-147BA Quick Start Manual preview
SBO-147BA
Бренд: Hanwha Techwin Страницы: 2
Uconnect UHF Quick Start Manual preview
UHF
Бренд: Uconnect Страницы: 3
Aiphone GHW-LC Installation And Operation Manual preview
GHW-LC
Бренд: Aiphone Страницы: 12
Linksys WUSBF54G Product Data preview
WUSBF54G
Бренд: Linksys Страницы: 2
Targus Universal 70W Power Adapter User Manual preview
Universal 70W Power Adapter
Бренд: Targus Страницы: 2
EtherWAN GE3100 User Manual preview
GE3100
Бренд: EtherWAN Страницы: 21
Lindemann Limetree Bridge Manual preview
Limetree Bridge
Бренд: Lindemann Страницы: 40
Parabel CR-505 User Manual preview
CR-505
Бренд: Parabel Страницы: 16
National Instruments SC-205X Series User Manual preview
SC-205X Series
Бренд: National Instruments Страницы: 119
SUNRICH TECHNOLOGY u-1300 User Manual preview
u-1300
Бренд: SUNRICH TECHNOLOGY Страницы: 7
Paradyne ACCULINK 3150 Operator'S Manual preview
ACCULINK 3150
Бренд: Paradyne Страницы: 234
MSI MS-6861 User Manual preview
MS-6861
Бренд: MSI Страницы: 41
MSI US54SE User Manual preview
US54SE
Бренд: MSI Страницы: 74
Jupio BVM0255 Manual preview
BVM0255
Бренд: Jupio Страницы: 15
Jupiter JI-300 User Manual preview
JI-300
Бренд: Jupiter Страницы: 37
ABB MTQ22-FBP Manual preview
MTQ22-FBP
Бренд: ABB Страницы: 23
SeaLevel SeaISO ISO-1 User Manual preview
SeaISO ISO-1
Бренд: SeaLevel Страницы: 11
Oki LP441b Manual Rapide preview
LP441b
Бренд: Oki Страницы: 152

Бренды по названию

Популярные бренды

Загрузить еще бренды