HP Integrity rx4640 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 232

HP Integrity rx4640 Скачать руководство пользователя страница 2

2

Legal Notices

Copyright Notices.

© Copyright 2003-2004 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated. HP-UX Release 10.20 and later and HP-UX Release
11.00 and later (in both 32 and 64-bit configurations) on all HP 9000 computers are Open Group UNIX 95 branded products.
Intel and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other
countries. Linux is a registered trademark of Linus Torvalds. UNIX is a registered trademark of The Open Group. Windows is
a registered trademark of Microsoft Corporation.

Printed in the U.S.A.

Reproduction, adaptation, or translation of this document without prior written permission is prohibited, except as allowed
under the copyright laws.

Related Documents.

The

HP Server Documentation CD-ROM

has been provided with your server. It contains a complete

documentation set for the server, including localized versions of key documents. Included on the CD-ROM are the

Site

Preparation

and

Operations and Maintenance

guides, which contain in-depth troubleshooting, installation, and repair

information.

The CD will autorun when you insert it into a Windows

®

workstation, or, point your browser at the index.htm file located

under the

Start

directory of the CD. All users, including UNIX

®

/Linux, can access a complete manual set by viewing the

directory

manuals

. The manuals are in Adobe

®

Acrobat

®

Reader (pdf) format.

IMPORTANT

The latest versions of these documents, and any updates to these documents, are posted under the appropriate
server at

http://docs.hp.com

.

Where to Get Help.

For online access to technical support information, self-solve tools, online assistance, community forums

of IT experts, broad multivendor knowledge base, and monitoring and diagnostic tools, go to

http://www.hp.com/support

.

«
1
2
3
4
...
»

Содержание Integrity rx4640









































































































































































































































Отзывы:

Нет отзывов