manualshive.com logo in svg

HP HSG80 - StorageWorks RAID Array Controller, Справочное руководство, Страница: 14 / 266

Поделиться
Скачать
HP HSG80 - StorageWorks RAID Array Controller Скачать руководство пользователя страница 14

1–6

HSG80 Array Controller V8.7 Command Line Interface Reference Guide

CLI Command Introduction

•

ADD ASSOCIATIONS

•

ADD REMOTE_COPY_SET

•

DELETE association-set-name

•

DELETE remote-copy-set-name

•

SET association-set-name

•

SET remote-copy-set-name

•

SITE FAILOVER

Getting Help

To get help with using the CLI commands, enter HELP at the CLI prompt. The 
resulting display shows an overview of the CLI Help System. To obtain help with a 
specific command or to determine what switches are available with a command, enter 
as much of the command syntax that is known, followed by a space and a question 
mark.

For example, to get information on the switches used with the SET 
THIS_CONTROLLER command, enter:

SET THIS_CONTROLLER=?

To see what is allowed for a prompt, enter the following:

SET THIS PROMPT=?

Entering CLI Commands

Use the following tips and techniques for the entering of CLI commands:

•

Commands are not case-sensitive.

•

For most commands, only enter enough of the command to make the command 
unique. For example, SHO is the same as entering SHOW.

•

The controller processes each command in sequence, regardless of the number of 
commands entered. A controller experiencing heavy data I/O might respond 
slowly to CLI commands.

Specific keys or a combination of keys allow the ability to recall and edit the last four 
commands. This feature can save time and help prevent mistakes when entering 
similar commands during the configuration process. Table 1–1 lists the keys used to 
recall and edit commands.

Содержание HSG80 - StorageWorks RAID Array Controller











































































































































































































































































Отзывы:

Нет отзывов