HP HP 4062F, Руководство по установке

Страница: 88 / 174

Figure 4-27 sho ws the cable connections b et w een the HP 8110A PGs and HP 4085F SWM.
The PG cables are wrapp ed in a zipp er tub e and xed on the cabinet frame with cable ties at
the factory . Use the following pro cedure to connect the PG cables:
1. A ttach the cable adapter (HP part n um b er 04085-61066) to the HP 4085F SWM.
2. On rear panel of HP 8110A, connect BNC connector of eac h PG cable to corresp onding
OUTPUT 1 or OUTPUT 2 terminal. Eac h PG cable has a tag that indicates the
OUTPUT terminal of HP 8110A to whic h y ou should connect the cable. F or example, if
cable has tag \PG31", connect it to OUTPUT 1 terminal of the HP 8110A (PG3).
3. P ass the PG cables through the op ening of the rear panel.
4. On the cable adapter that is attached to HP 4085F SWM, connect BNC connector of eac h
PG cable to corresp onding HF p ort. Hewlett-Pac k ard recommends that when y ou install
the HP 4062F system, y ou connect the PG cables to the HF p orts as sho wn in T able 4-13.
T able 4-13.
Connections Betw een Output T erminals of the HP 8110A and HF P orts
HP 8110A Name Output T erminal PG Cable HF P ort
PG1 OUTPUT 1 PG11 HF1
OUTPUT 2 PG12 HF2
PG2 OUTPUT 1 PG21 HF3
OUTPUT 2 PG22 HF4
PG3 OUTPUT 1 PG31 HF5
OUTPUT 2 PG32 HF6
PG4 OUTPUT 1 PG41 HF7
OUTPUT 2 PG42 HF8
PG5 OUTPUT 1 PG51 HF9
OUTPUT 2 PG52 HF10
Figure 4-27. Connecting the HP 8110A PGs to the HP 4085F SWM
4-42 System Installation