HP HP 4062F, Руководство по установке

Страница: 72 / 174

HP-IB Cables and Addresses
HP-IB Addresses and Connections of the Rack Mounted Instruments
The HP-IB addresses of rac k moun ted instrumen ts|the HP 4084B SW C, HP 4142B DCS, HP
4280A CMU or HP 4284A CMU84, and HP 8110A PG(s)|are set when installed in the HP
4062UX/F system cabinet at the factory . Make sure the HP-IB address of eac h instrumen t is
set correctly , as sho wn in T able 4-10. Refer to the Op er ation Manual of eac h instrumen t to
c hec k the HP-IB address settings.
T able 4-10. HP-IB Address Settings
Instrumen t HP-IB Address How to Chec k 1 1 1 1 1
HP 4084B SW C1
1
22 Mini-rotary switc hes on the rear panel
HP 4084B SW C2
1
19 Mini-rotary switc hes on the rear panel
HP 4142B DCS 23 Mini-rotary switc hes on the rear panel
HP 4280A CMU
2
24 Mini-rotary switc hes on the rear panel
HP 4284A CMU84
2
17 Press 4
CA T ALOG/SYSTEM
5 k ey and select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SYSTEM CONFIG softk ey . The HP-IB
address setting is sho wn in the screen.
HP 8110A PG 25 to 29
3
Press 4 MORE 5 k ey , then select
NNNNNNNNNNNNNNNNNN
CONFIG
softk ey . HP-IB address setting is sho wn on
the screen. Y ou can use the rotary knob to
c hange the address setting.
1 F or 96-pin SWM system, t w o SW Cs are provided, the low ermost SW C in the system cabinet is SW C1,
and the upp ermost SW C is SW C2.
2 An HP 4280A and an HP 4284A cannot b oth b e installed in the HP 4062F system at the same time.
3 Dep ends on num b er of installed HP 8110As. If one HP 8110A is installed, it has HP-IB address 25. If
t w o HP 8110As are installed, they have HP-IB addresses 25 and 26, and so on.
T able 4-11 and T able 4-12 sho ws ho w to connect the system instrumen ts to the HP-IB
in terface cards in the system con troller.
4-26 System Installation