HP DESIGNJET 3D, Руководство по обслуживанию

Страница: 457 / 458

-441
The MZ command moves the Z-Stage relative to the current position. A
positive value moves the Z-Stage down. A negative value moves the Z-Stage
up.
Example:
mz 4.0 This command will move the Z-Stage 4 inch down.
10.
mx
= move x
This command moves the head in the X axis.
Parameters:
Float Position:
This is the absolute position it moves to, in inches, when the
command is sent from the Console and in device units when the
command is sent through the DPM.
Example: mx 3.0 (moves the X-Axis 3 inches away from the X-Home
sensor)
11.
my
= move y
This command moves the head in the y axis.
Parameters:
Float Position:
This is the absolute position it moves to, in inches, when the
command is sent from the Console and in device units when the
command is sent through the DPM.
Example: my 3.0 (moves the Y-Axis 3 inches away from the Y-Home
sensor)
12.
cl
= chamber light
This command turns the chamber light on and off.
Example:
cl 1
Parameters:
13.
dl
= door latch
This command controls the door latch solenoid. The door latch can be
opened or closed.
Example:
dl 1
Parameters:
Command Description
cl 0
Turns the light off
cl 1
Turns the light on
Command Description
dl 0
Opens door latch
dl 1
Closes door latch
dl 2 Places controller in charge of door latch