HP DESIGNJET 3D, Руководство по обслуживанию

Страница: 369 / 458

-353
Figure 339: Measuring diameter of B
11. Next measure and record the distance from the outside edges of circle A
and B, see Figure 340 Ensure that the caliper is not seated on the small
bump of circle A.
Figure 340: Measuring distance from outside edges of A and B
12. Next measure and record the distance from the outside edges of circle B
and C, see Figure 341 Ensure that the caliper is not seated on the small
bump of circle C.
Figure 341: Measuring distance from outside edges of B and C
13. Add the lengths derived from steps 5 and 6 (A-B and B-C) and then sub-
tract the width of circle B. Record this total as “Front”
14. Measure and record the distance from the outside edges of circles E and
F. Ensure the caliper is not seated on the small bump of circle E. See Fig-
ure 342