HP DESIGNJET 3D, Руководство по обслуживанию

Страница: 115 / 458

-99
14,117 A command failed while
modeling
1. Download CFG file - check error code
details.
2. Toggle failure - reference 14,129.
3. Check and reseat connectors/pins on J506
on the I/O card and J301 on the head
board.
4. Replace Toggle Head assembly.
5. Replace PDB (U8 chip failure).
14,118 Invalid cyclic redundancy
check
Software error; will not be displayed
14,119 Operation already active Software error; will not be displayed
14,120 Invalid vector detected
1. Reprocess the part and send again.
2. Reorient part and send again.
3. If the frequency of the error is greater than
once every three months, then replace the
SBC or hard drive.
14,121 Processor Exception 1. Cycle power.
14,122 Processor halted 1. Cycle power.
14,123 Watchdog timeout 1. Cycle power.
2. Check all cable connections including
thermocouples.
3. Escalate the case providing .cfg file.
14,124 Stack overflow 1. Cycle power.
2. If problem persists, replace controller board.
14,125 Runtime error 1. Cycle power.
14,126 Operation active - try
again
1. Cycle power.
14,127 Invalid gender 1. Cycle power.
2. If problem persists, replace controller board.
14,128 Invalid platform 1. Cycle power.
2. If problem persists, replace controller board.
Code Description Corrective Actions