manualshive.com logo in svg

HP Compaq 6000, Инструкция по установке

Поделиться
Скачать
HP Compaq 6000 Скачать руководство пользователя страница 59

3-8

    

Security Features

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: D-CH03.DOC   Last Saved On: 11/3/97 5:36 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

7.  Turn off the workstation once more.

8.  Return switch 2 to its original default (OFF) position.

9.  Reassemble and restart the workstation.

10.  Establish a new Power-On Password, if desired.

Advanced Security Management

The following security features can be accessed through the Computer Setup
option on the Compaq Utilities menu.

■ 

Setup Password

■ 

Disable removable media boot ability

■ 

Disable removable media write ability

■ 

Disable serial port

■ 

Disable parallel port

■ 

QuickLock/QuickBlank

■ 

Disable/enable keyboard and mouse interface

NOTE

:     QuickLock/QuickBlank must be used in combination with the Power-On

Password.

Establishing a Setup Password

Establishing a Setup Password through the Computer Setup utility prevents
reconfiguration of the workstation until the Setup Password is entered.

If your workstation does not have a Setup Password enabled, the ROM is not
write-protected. Updates may occur that could disrupt the operating system.
The Setup Password is disabled when the workstation leaves the factory.

NOTE

:     The Setup Password is different from the Power-On Password. The

Setup Password is designed for network administrators to lock in the proper
configuration settings of the workstation. Individual users can still retain local
control of the workstation by using the Power-On Password feature.

Содержание Compaq 6000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды