manualshive.com logo in svg

HP Compaq 6000, Инструкция по установке

Поделиться
Скачать
HP Compaq 6000 Скачать руководство пользователя страница 51

2-24

    

Hardware Upgrades

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: C-CH02.DOC   Last Saved On: 11/3/97 5:34 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

4.  Remove the following components:

❏ 

large access panel

❏ 

security screw

❏ 

processor cage

5.  Loosen the thumbscrew to open the processor cage.

6.  To install a second Pentium II processor on a Compaq Professional

Workstation 6000:

❏ 

Remove the terminator board.

❏ 

Install the new processor board. The board ships with the Pentium II
processor, heatsink, and Processor Power Module already attached.
(Refer to the documentation included with the processor upgrade kit
for more complete instructions.)

7.  To install an additional (third) Pentium Pro processor on a Compaq

Professional Workstation 8000:

❏ 

Remove the terminator board.

❏ 

Install the additional processor and a Processor Power Module on a
new processor board. (Refer to the documentation included with the
processor upgrade kit for more complete instructions.)

8.  Reassemble the workstation.

IMPORTANT:

    If you are upgrading from one processor to two or more, you

must install a new Multiprocessing HAL from an NT Support Software Diskette.
For additional information, see instructions provided with the processor
upgrade kit.

Upgrading the Processor

To upgrade the processor, follow the installation procedures included with the
processor upgrade kit.

Содержание Compaq 6000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды