manualshive.com logo in svg

HP Compaq 6000, Инструкция по установке

Поделиться
Скачать
HP Compaq 6000 Скачать руководство пользователя страница 54

3-3

Compaq Professional Workstation 6000 and 8000 Reference Guide

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: D-CH03.DOC   Last Saved On: 11/3/97 5:36 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Establishing a Power-On Password Using
Computer Setup

Establishing a Power-On Password through Computer Setup prevents access to
the workstation when power is turned on, unless the password is entered. The
password must be entered each time the workstation is turned on, when the key
icon ( 

 ) appears on the monitor.

To establish a Power-On Password through Computer Setup:

1.  Turn on the workstation.

2.  When the cursor appears in the upper-right corner of the screen, press

F10.

NOTE

:     The cursor displays in the upper-right corner of the screen for

approximately two seconds. If you do not press 

F10 

during this time, you must

turn the workstation off, then on again to access the utility.

3. Press Enter to bypass the welcome screens and display the main menu.

4.  From the main menu, select Computer Setup, and press Enter. The

workstation prompts you to reboot. Press Enter and the workstation will
restart into Computer Setup.

5.  From the Computer Setup main menu, select the Security Management

feature under Built In Devices.

6.  Locate the Power-On Password option and follow the instructions

provided to enable it.

7.  For more information about the various screen and configuration options,

see Chapter 4.

8.  Save the configuration and exit the utility.

NOTE

:     The Power-On Password may only be established (for the first time)

using the Computer Setup utility.  Once established, the Setup utility cannot be
used to change or delete the Power-On Password.  To change or delete the
Power-On Password, see “Changing a Power-On Password” or “Deleting a
Power-On Password” in this chapter.

Содержание Compaq 6000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды