manualshive.com logo in svg

HP Compaq 6000, Инструкция по установке

Поделиться
Скачать
HP Compaq 6000 Скачать руководство пользователя страница 37

2-10

    

Hardware Upgrades

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: C-CH02.DOC   Last Saved On: 11/3/97 5:34 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

5.  Remove the processor cage from the chassis by:

❏ 

Pressing up on the latch 

➊

 in the center of the release lever.

❏ 

Swinging the release lever 

➋

 out to disengage the processor cage

slightly from the chassis.

6.  Remove the processor cage 

➌

.

1

2

3

tulan004.eps

Figure 2-4.

   

 

Removing the processor cage

7.  Turn the cage over, loosen the thumbscrew, and lift the cover to gain

access to the processor cage system board, processor(s), processor
board(s), terminator board (if present), DIMM modules, memory
expansion board, switches, and connectors.

8.  For information on upgrading or installing processor cage components,

refer to the documentation included with the option kit, the Quick Setup
Poster, or the hood labels.

9.  To replace the processor cage, align the rails on the processor cage with

the rails on the chassis.

Содержание Compaq 6000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды