manualshive.com logo in svg

HP Compaq 6000, Инструкция по установке

Поделиться
Скачать
HP Compaq 6000 Скачать руководство пользователя страница 18

1-2

    

Product Features

Writer: Jean Schuck   Project: Compaq Professional Workstation 6000 and 8000 Reference Guide   Comments: 270217-002

File Name: B-CH01.DOC   Last Saved On: 11/3/97 5:38 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Standard Features

The following features are standard on the Compaq Professional Workstation
6000 and 8000:

Processors and System Memory

Compaq Professional Workstation 6000

■ 

Standard with one 266-, 300-, or 333-MHz Pentium II processor with an
integrated 512-KB Level 2 Cache

■ 

Upgradable to two processors with addition of an optional second
processor and processor board

■ 

Error Checking and Correcting (ECC) Memory uses an encoding
scheme for memory error detection and correction. Specifically, this
feature detects and corrects all single-bit memory errors, and detects and
reports double-bit errors.

■ 

32-, 64-, or 128-MB, EDO buffered, 128-bit system memory expandable
to 512-MB

■ 

Supports 60-ns or faster EDO non-parity 16-, 32-, 64-, 128-, or 256-MB,
4-K refreshed DIMMs added in pairs.

Compaq Professional Workstation 8000

■ 

Standard with two 200-MHz Pentium Pro processors with an integrated
512-KB Level 2 Cache

■ 

Support for up to two additional 200-MHz Pentium Pro processors with
the addition of an optional second processor board (four processors
maximum)

■ 

Error Checking and Correcting (ECC) Memory uses an encoding
scheme for memory error detection and correction. Specifically, this
feature detects and corrects all single-bit memory errors, and detects and
reports double-bit errors.

Содержание Compaq 6000
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды